Introducing Keysight's N7614B Signal Studio for Power Amplifier Test

  
  

The following product photos are available for use by the media, based on the Keysight Photography Use Policy.

Typical power amplifier ET and DPD test configuration using the N7614B Signal Studio with an MXG X-Series signal generator and an X-Series signal analyzer

Image 1:
Typical power amplifier ET and DPD test configuration using the N7614B Signal Studio with an MXG X-Series signal generator and an X-Series signal analyzer.

Low-JPEG Download (0.2MB)

N7614B Signal Studio for PA test block diagram view.

Image 2:
N7614B Signal Studio for PA test block diagram view.

Low-JPEG Download (0.2MB)

Shown here is a PA ACP result for an 802.11n 20-MHz MCS7 using the N7614B's DPD memory polynomial.

Image 3:
Shown here is a PA ACP result for an 802.11n 20-MHz MCS7 using the N7614B's DPD memory polynomial.

Low-JPEG Download (0.2MB)

Shown here is a PA measurement results, including AM/AM, AM/PM and ACP, for an LTE 5-MHz full RB using the N7614B's ET and DPD combined measurement.

Image 4:
Shown here is a PA measurement results, including AM/AM, AM/PM and ACP, for an LTE 5-MHz full RB using the N7614B's ET and DPD combined measurement.

Low-JPEG Download (0.2MB)

Related Information
Press Release:
Keysight Technologies Introduces Cost-Effective, General-Purpose Software Test Suite for Improving Power Amplifier Efficiency
(2014-August-11)

Keysight Photography Use Policy:

We will permit use of Keysight photography available via this site as long as the use will not disparage Keysight nor imply endorsement by Keysight. The photography cannot be changed or manipulated in any way with the exception of resizing or cropping. By downloading our product photography you are indicating that you accept these terms. Any commercial use of these images must be approved by Keysight Technologies.

ALL IMAGES USED MUST INDICATE:
"Reproduced with Permission, Courtesy of Keysight Technologies, Inc."

How do I download images:

To download files in Windows, use the right mouse button on the desired format (JPEG or TIFF) and choose 'Save Target As...'